Flange Dur a Flange Pipe Flange Threaded (screwed)
Fflans dur
1.Types: Slip-On, Gwddf Weldio, Dall, Weldio Socedi, Trywydd, Lap ar y Cyd a Phlât ac ati;
2.Standard:
(1) ANSI B16.5, A105 150LB / 300LB / 600LB / 900LB / 1500LB / 2500LB
(2) DIN 2573 PN6 / DIN 2576 PN10 / DIN2502 PN16 / DIN2503 P25-40 / DIN2566 PN16 / DIN2631-2635 RST37.2 NEU C22.8
(3) JIS SS400 NEU SF440 5K / 10K / 16K / 20K / 30K
(4) UNI 2276/2277/2278/6084/6089/6090/2544/2282 / 6091-6093
(5) EN1092 PN6 / PN10 / PN16 / PN25 / PN40 / TYPE1 TYPE2 MATH 5 MATH 12 MATH 13
(6) BS4504 SANI1123 1000/3, 1600/3, 2500/3, T / D, T / E, flange dur carbon T / F.
(7) AS2129 TABL D / TABL H / TABLE E flange dur carbon
(8) GOST 12820-80 / 12821-80 flange dur carbon
Trwch 3.Wall: Sch10, Sch20, Sch30, STD, Sch40, XS, Sch80, Sch100, Sch120, Sch140, XXS;
Sgôr 4.Pressure: Dosbarth 150LBS, 300LBS, 600LBS, 900LBS, 1500LBS, 2000LBS, 3000LBS, 6000LBS, 9000 LBS;
5.Size: 1/2 "- 24";
Triniaeth wyneb 6.Ar: Olew gwrth-rwd, galfanedig du / melyn / tryloyw / trydan / galfanedig poeth.
Cyflwyniad flange wedi'i threaded
Nid yw flange wedi'i threaded yn perthyn i'r flange pwysedd uchel, mae'r pwysau cymwys yn fach, fel adeiladu peirianneg, systemau dŵr aerdymheru, ac ati, mae'n ddiogel i'w ddefnyddio.Dywedir yn aml bod flange wedi'i threaded yn fath o gynhyrchion gwifren, fel y cartref a ddefnyddir i fynd i mewn i'r ffitiadau pibell ddŵr, yw'r wifren, yn amlach mewn adeiladu peirianneg, gyda gosodiad hawdd, cynnal a chadw hawdd, heb fanteision weldio, ni all. caniatáu weldio, nid yw'n hawdd ei weldio, neu nid yw perfformiad weldio yn dda ar y defnydd piblinell.Nid yw flange wedi'i threaded yn perthyn i'r flange pwysedd uchel, mae flange threaded safonol yn flange necked, yn ychwanegol at y flange hefyd yn wahanol, meintiau eraill gyda flange weldio fflat gwddf, flange weldio soced yr un peth, flange threaded un pen gyda'r pibell wedi'i threaded cysylltiad, y pen arall â flanges eraill, gorchudd fflans, offer, falfiau, ac ati wedi'u cysylltu.
Mae flange wedi'i threaded nid yn unig yn arbed lle ac yn lleihau pwysau, ond hefyd yn sicrhau na fydd y cymal yn gollwng a bod ganddo berfformiad selio da.Mae maint y flange cryno yn cael ei leihau oherwydd bod diamedr y sêl yn cael ei leihau, a fydd yn lleihau'r rhan o'r wyneb selio.Yn ail, mae'r cylch selio wedi disodli'r gasged flange i sicrhau bod yr arwyneb selio yn cyd-fynd â'r wyneb selio.Yn y modd hwn, dim ond pwysau bach sydd ei angen i gywasgu'r wyneb selio.Gyda gostyngiad yn y pwysau gofynnol, gellir lleihau maint a nifer y bolltau yn unol â hynny.Felly, mae cynnyrch newydd gyda chyfaint bach a phwysau ysgafn (70% ~ 80% yn llai na phwysau'r flange traddodiadol) wedi'i ddylunio.Felly, mae'r flange weldio gwastad yn lleihau'r ansawdd a'r gofod, ac yn chwarae rhan bwysig mewn cymhwysiad diwydiannol.Egwyddor selio flange weldio gwastad: mae dau arwyneb selio'r bollt yn gwasgu'r gasged flange ac yn ffurfio sêl, ond mae hyn hefyd yn arwain at ddifrod y sêl.Er mwyn cadw'r sêl, mae angen cynnal grym bollt enfawr.Felly, dylid gwneud y bollt yn fwy.Dylai'r bollt mwy gyd-fynd â'r cneuen fwy, sy'n golygu bod angen y bollt â diamedr mwy i greu amodau ar gyfer tynhau'r cneuen.Fodd bynnag, po fwyaf yw diamedr y bollt, bydd y flange cymwys yn cael ei blygu trwy gynyddu trwch wal y rhan flange.
dimensiynau flange dur ffug dosbarth150
| Maint enwol | Y tu allan i diam.o flange | Trwchus.o flange | Diam.o wyneb uchel | Diam y canolbwynt yn y gwaelod | Hyd y canolbwynt | Munud.edau lenght | Fy.cownter | Nifer y tyllau | Diam.o dyllau | Diam.o folltau | Diam.o gylch bollt | Tua.punnoedd pwysau Kg | |
| -bore | |||||||||||||
| O | C | R | X | Y | T | Q | |||||||
| yn. | 1/2 " | 3.5 | 0.44 | 1.38 | 1.19 | 0.62 | 0.62 | 4 | 0.62 | 1/2 | 2.38 | 1 | |
| mm. | 88.9 | 11.2 | 35.1 | 30.2 | 15.7 | 15.7 | 15.7 | 12.7 | 60.5 | 0.5 | |||
| yn. | 3/4 " | 3.88 | 0.5 | 1.69 | 1.5 | 0.62 | 0.62 | 4 | 0.62 | 1/2 | 2.75 | 2 | |
| mm. | 98.6 | 12.7 | 42.9 | 38.1 | 15.7 | 15.7 | 15.7 | 12.7 | 69.9 | 1 | |||
| yn. | 1" | 4.25 | 0.56 | 2 | 1.94 | 0.69 | 0.69 | 4 | 0.62 | 1/2 | 3.12 | 2 | |
| mm. | 108 | 14.2 | 50.8 | 49.3 | 17.5 | 17.5 | 15.7 | 12.7 | 79.2 | 1 | |||
| yn. | 1 1/4 " | 4.62 | 0.62 | 2.5 | 2.31 | 0.81 | 0.81 | 4 | 0.62 | 1/2 | 3.5 | 3 | |
| mm. | 117.3 | 15.7 | 63.5 | 58.7 | 20.6 | 20.6 | 15.7 | 12.7 | 88.9 | 1 | |||
| yn. | 1 1/2 " | 5 | 0.69 | 2.88 | 2.56 | 0.88 | 0.88 | 4 | 0.62 | 1/2 | 3.88 | 3 | |
| mm. | 127 | 17.5 | 73.2 | 65 | 22.4 | 22.4 | 15.7 | 12.7 | 98.6 | 1 | |||
| yn. | 2" | 6 | 0.75 | 3.62 | 3.06 | 1 | 1 | 4 | 0.75 | 5/8 | 4.75 | 5 | |
| mm. | 152.4 | 19.1 | 91.9 | 77.7 | 25.4 | 25.4 | 19.1 | 15.9 | 120.7 | 2 | |||
| yn. | 2 1/2 " | 7 | 0.88 | 4.12 | 3.56 | 1.12 | 1.12 | 4 | 0.75 | 5/8 | 5.5 | 7 | |
| mm. | 177.8 | 22.4 | 104.6 | 90.4 | 28.4 | 28.4 | 19.1 | 15.9 | 139.7 | 3 | |||
| yn. | 3" | 7.5 | 0.94 | 5 | 4.25 | 1.19 | 1.19 | 4 | 0.75 | 5/8 | 6 | 8 | |
| mm. | 190.5 | 23.9 | 127 | 108 | 30.2 | 30.2 | 19.1 | 15.9 | 152.4 | 4 | |||
| yn. | 3 1/2 " | 8.5 | 0.94 | 5.5 | 4.81 | 1.25 | 1.25 | 8 | 0.75 | 5/8 | 7 | 11 | |
| mm. | 215.9 | 23.9 | 139.7 | 122.2 | 31.8 | 31.8 | 19.1 | 15.9 | 177.8 | 5 | |||
| yn. | 4" | 9 | 0.94 | 6.19 | 5.31 | 1.31 | 1.31 | 8 | 0.75 | 5/8 | 7.5 | 13 | |
| mm. | 228.6 | 23.9 | 157.2 | 134.9 | 33.3 | 33.3 | 19.1 | 15.9 | 190.5 | 6 | |||
| yn. | 5" | 10 | 0.94 | 7.31 | 6.44 | 1.44 | 1.44 | 8 | 0.88 | 3/4 | 8.5 | 15 | |
| mm. | 254 | 23.9 | 185.7 | 163.6 | 36.6 | 36.6 | 22.4 | 19.1 | 215.9 | 7 | |||
| yn. | 6" | 11 | 1 | 8.5 | 7.56 | 1.56 | 1.56 | 8 | 0.88 | 3/4 | 9.5 | 19 | |
| mm. | 279.4 | 25.4 | 215.9 | 192 | 39.6 | 39.6 | 22.4 | 19.1 | 241.3 | 9 | |||
| yn. | 8" | 13.5 | 1.12 | 10.62 | 9.69 | 1.75 | 1.75 | 8 | 0.88 | 3/4 | 11.75 | 30 | |
| mm. | 342.9 | 28.4 | 269.7 | 246.1 | 44.5 | 44.5 | 22.4 | 19.1 | 298.5 | 14 | |||
| yn. | 10 " | 16 | 1.19 | 12.75 | 12 | 1.94 | 1.94 | 12 | 1 | 7/8 | 14.25 | 43 | |
| mm. | 406.4 | 30.2 | 323.9 | 304.8 | 49.3 | 49.3 | 25.4 | 22.2 | 362 | 20 | |||
| yn. | 12 " | 19 | 1.25 | 15 | 14.38 | 2.19 | 2.19 | 12 | 1 | 7/8 | 17 | 64 | |
| mm. | 482.6 | 31.8 | 381 | 365.3 | 55.6 | 55.6 | 25.4 | 22.2 | 431.8 | 29 | |||
| yn. | 14 " | 21 | 1.38 | 16.25 | 15.75 | 2.25 | 2.25 | 12 | 1.12 | 1 | 18.75 | 90 | |
| mm. | 533.4 | 35.1 | 412.8 | 400.1 | 57.2 | 57.2 | 28.4 | 25.4 | 476.3 | 41 | |||
| yn. | 16 " | 23.5 | 1.44 | 18.5 | 18 | 2.5 | 2.5 | 16 | 1.12 | 1 | 21.25 | 98 | |
| mm. | 596.9 | 36.6 | 469.9 | 457.2 | 63.5 | 63.5 | 28.4 | 25.4 | 539.8 | 44 | |||
| yn. | 18 " | 25 | 1.56 | 21 | 19.88 | 2.69 | 2.69 | 16 | 1.25 | 1.13 | 22.75 | 130 | |
| mm. | 635 | 39.6 | 533.4 | 505 | 68.3 | 68.3 | 31.8 | 28.6 | 577.9 | 59 | |||
| yn. | 20 " | 27.5 | 1.69 | 23 | 22 | 2.88 | 2.88 | 20 | 1.25 | 1 1/8 | 25 | 165 | |
| mm. | 698.5 | 42.9 | 584.2 | 558.8 | 73.2 | 73.2 | 31.8 | 28.6 | 635 | 75 | |||
| yn. | dau ddeg pedwar" | 32 | 1.88 | 27.25 | 26.12 | 3.25 | 3.25 | 20 | 1.38 | 1 1/4 | 29.5 | 220 | |
| mm. | 812.8 | 47.8 | 692.2 | 663.4 | 82.6 | 82.6 | 35.1 | 31.8 | 749.3 | 100 |
dimensiynau flange dur ffug dosbarth300
| Maint enwol | Y tu allan i diam.o flange | Trwchus.o flange | Diam.o wyneb uchel | Diam y canolbwynt yn y gwaelod | Hyd y canolbwynt | Munud.hyd edau | Fy.gwrth- | Nifer y tyllau | Diam.o dyllau | Diam.o folltau | Diam.o gylch bollt | Tua.punnoedd pwysau Kg | |
| turio | |||||||||||||
| O | C | R | X | Y | T | Q | |||||||
| yn. | 1/2 " | 3.75 | 0.56 | 1.38 | 1.5 | 0.88 | 0.62 | 0.93 | 4 | 0.62 | 1/2 | 2.62 | 2 |
| mm. | 95.3 | 14.2 | 35.1 | 38.1 | 22.4 | 15.7 | 23.6 | 15.7 | 12.7 | 66.5 | 1 | ||
| yn. | 3/4 " | 4.62 | 0.62 | 1.69 | 1.88 | 1 | 0.62 | 1.14 | 4 | 0.75 | 5/8 | 3.25 | 3 |
| mm. | 117.3 | 15.7 | 42.9 | 47.8 | 25.4 | 15.7 | 29 | 19.1 | 15.9 | 82.6 | 1 | ||
| yn. | 1" | 4.88 | 0.69 | 2 | 2.12 | 1.06 | 0.69 | 1.41 | 4 | 0.75 | 5/8 | 3.5 | 3 |
| mm. | 124 | 17.5 | 50.8 | 53.8 | 26.9 | 17.5 | 35.8 | 19.1 | 15.9 | 88.9 | 1 | ||
| yn. | 1 1/4 " | 5.25 | 0.75 | 2.5 | 2.5 | 1.06 | 0.81 | 1.75 | 4 | 0.75 | 5/8 | 3.88 | 4 |
| mm. | 133.4 | 19.1 | 63.5 | 63.5 | 26.9 | 20.6 | 44.5 | 19.1 | 15.9 | 98.6 | 2 | ||
| yn. | 1 1/2 " | 6.12 | 0.81 | 2.88 | 2.75 | 1.19 | 0.88 | 1.99 | 4 | 0.88 | 3/4 | 4.5 | 6 |
| mm. | 155.4 | 20.6 | 73.2 | 69.9 | 30.2 | 22.4 | 50.5 | 22.4 | 19.1 | 114.3 | 3 | ||
| yn. | 2" | 6.5 | 0.88 | 3.62 | 3.31 | 1.31 | 1.12 | 2.5 | 8 | 0.75 | 5/8 | 5 | 7 |
| mm. | 165.1 | 22.4 | 91.9 | 84.1 | 33.3 | 28.4 | 63.5 | 19.1 | 15.9 | 127 | 3 | ||
| yn. | 2 1/2 " | 7.5 | 1 | 4.12 | 3.94 | 1.5 | 1.25 | 3 | 8 | 0.88 | 3/4 | 5.88 | 10 |
| mm. | 190.5 | 25.4 | 104.6 | 100.1 | 38.1 | 31.8 | 76.2 | 22.4 | 19.1 | 149.4 | 5 | ||
| yn. | 3" | 8.25 | 1.12 | 5 | 4.62 | 1.69 | 1.25 | 3.63 | 8 | 0.88 | 3/4 | 6.62 | 13 |
| mm. | 209.6 | 28.4 | 127 | 117.3 | 42.9 | 31.8 | 92.2 | 22.4 | 19.1 | 168.1 | 6 | ||
| yn. | 3 1/2 " | 9 | 1.19 | 5.5 | 5.25 | 1.75 | 1.44 | 4.13 | 8 | 0.88 | 3/4 | 7.25 | 17 |
| mm. | 228.6 | 30.2 | 139.7 | 133.4 | 44.5 | 36.6 | 104.9 | 22.4 | 19.1 | 184.2 | 8 | ||
| yn. | 4" | 10 | 1.25 | 6.19 | 5.75 | 1.88 | 1.44 | 4.63 | 8 | 0.88 | 3/4 | 7.88 | 22 |
| mm. | 254 | 31.8 | 157.2 | 146.1 | 47.8 | 36.6 | 117.6 | 22.4 | 19.1 | 200.2 | 10 | ||
| yn. | 5" | 11 | 1.38 | 7.31 | 7 | 2 | 1.69 | 5.69 | 8 | 0.88 | 3/4 | 9.25 | 28 |
| mm. | 279.4 | 35.1 | 185.7 | 177.8 | 50.8 | 42.9 | 144.5 | 22.4 | 19.1 | 235 | 13 | ||
| yn. | 6" | 12.5 | 1.44 | 8.5 | 8.12 | 2.06 | 1.81 | 6.75 | 12 | 0.88 | 3/4 | 10.62 | 39 |
| mm. | 317.5 | 36.6 | 215.9 | 206.2 | 52.3 | 46 | 171.5 | 22.4 | 19.1 | 269.7 | 18 | ||
| yn. | 8" | 15 | 1.62 | 10.62 | 10.25 | 2.44 | 2 | 8.75 | 12 | 1 | 7/8 | 13 | 58 |
| mm. | 381 | 41.1 | 269.7 | 260.4 | 62 | 50.8 | 222.3 | 25.4 | 22.2 | 330.2 | 26 | ||
| yn. | 10 " | 17.5 | 1.88 | 12.75 | 12.62 | 2.62 | 2.19 | 10.88 | 16 | 1.12 | 1 | 15.25 | 81 |
| mm. | 444.5 | 47.8 | 323.9 | 320.5 | 66.5 | 55.6 | 276.4 | 28.4 | 25.4 | 387.4 | 37 | ||
| yn. | 12 " | 20.5 | 2 | 15 | 14.75 | 2.88 | 2.38 | 12.94 | 16 | 1.25 | 1 1/8 | 17.75 | 115 |
| mm. | 520.7 | 50.8 | 381 | 374.7 | 73.2 | 60.5 | 328.7 | 31.8 | 28.6 | 450.9 | 52 | ||
| yn. | 14 " | 23 | 2.12 | 16.25 | 16.75 | 3 | 2.5 | 14.19 | 20 | 1.25 | 1 1/8 | 20.25 | 165 |
| mm. | 584.2 | 53.8 | 412.8 | 425.5 | 76.2 | 63.5 | 360.4 | 31.8 | 28.6 | 514.4 | 75 | ||
| yn. | 16 " | 25.5 | 2.25 | 18.5 | 19 | 3.25 | 2.69 | 16.19 | 20 | 1.38 | 1 1/4 | 22.5 | 190 |
| mm. | 647.7 | 57.2 | 469.9 | 482.6 | 82.6 | 68.3 | 411.2 | 35.1 | 31.8 | 571.5 | 86 | ||
| yn. | 18 " | 28 | 2.38 | 21 | 21 | 3.5 | 2.75 | 18.19 | 24 | 1.38 | 1 1/4 | 24.75 | 250 |
| mm. | 711.2 | 60.5 | 533.4 | 533.4 | 88.9 | 69.9 | 462 | 35.1 | 31.8 | 628.7 | 113 | ||
| yn. | 20 " | 30.5 | 2.5 | 23 | 23.12 | 3.75 | 2.88 | 20.19 | 24 | 1.38 | 1 1/4 | 27 | 315 |
| mm. | 774.7 | 63.5 | 584.2 | 587.2 | 95.3 | 73.2 | 512.8 | 35.1 | 31.8 | 685.8 | 143 | ||
| yn. | dau ddeg pedwar" | 36 | 2.75 | 27.25 | 27.62 | 4.19 | 3.25 | 24.19 | 24 | 1.62 | 1/2 | 32 | 475 |
| mm. | 914.4 | 69.9 | 692.2 | 701.5 | 106.4 | 82.6 | 614.4 | 41.1 | 38.1 | 812.8 | 215 |
dosbarth dimensiynau flange dur ffug600
| Maint enwol | Y tu allan i diam.o flange | Trwchus.o flange | Diam.o wyneb uchel | Diam y canolbwynt yn y gwaelod | Hyd y canolbwynt | Munud.hyd edau | Fy.gwrth- | Nifer y tyllau | Diam.o dyllau | Diam.o folltau | Diam.o gylch bollt | Tua.punnoedd pwysau Kg | |
| turio | |||||||||||||
| O | C | R | X | Y | T | Q | |||||||
| yn. | 1/2 " | 3.75 | 0.56 | 1.38 | 1.5 | 0.88 | 0.62 | 0.93 | 4 | 0.62 | 1/2 | 2.62 | 2 |
| mm. | 95.3 | 14.2 | 35.1 | 38.1 | 22.4 | 15.7 | 23.6 | 15.7 | 12.7 | 66.5 | 1 | ||
| yn. | 3/4 " | 4.62 | 0.62 | 1.69 | 1.88 | 1 | 0.62 | 1.14 | 4 | 0.75 | 5/8 | 3.25 | 3 |
| mm. | 117.3 | 15.7 | 42.9 | 47.8 | 25.4 | 15.7 | 29 | 19.1 | 15.9 | 82.6 | 1 | ||
| yn. | 1" | 4.88 | 0.69 | 2 | 2.12 | 1.06 | 0.69 | 1.41 | 4 | 0.75 | 5/8 | 3.5 | 4 |
| mm. | 124 | 17.5 | 50.8 | 53.8 | 26.9 | 17.5 | 35.8 | 19.1 | 15.9 | 88.9 | 2 | ||
| yn. | 1 1/4 " | 5.25 | 0.81 | 2.5 | 2.5 | 1.12 | 0.81 | 1.75 | 4 | 0.75 | 5/8 | 3.88 | 5 |
| mm. | 133.4 | 20.6 | 63.5 | 63.5 | 28.4 | 20.6 | 44.5 | 19.1 | 15.9 | 98.6 | 2 | ||
| yn. | 1 1/2 " | 6.12 | 0.88 | 2.88 | 2.75 | 1.25 | 0.88 | 1.99 | 4 | 0.88 | 3/4 | 4.5 | 7 |
| mm. | 155.4 | 22.4 | 73.2 | 69.9 | 31.8 | 22.4 | 50.5 | 22.4 | 19.1 | 114.3 | 3 | ||
| yn. | 2" | 6.5 | 1 | 3.62 | 3.31 | 1.44 | 1.12 | 2.5 | 8 | 0.75 | 5/8 | 5 | 9 |
| mm. | 165.1 | 25.4 | 91.9 | 84.1 | 36.6 | 28.4 | 63.5 | 19.1 | 15.9 | 127 | 4 | ||
| yn. | 2 1/2 " | 7.5 | 1.12 | 4.12 | 3.94 | 1.62 | 1.25 | 3 | 8 | 0.88 | 3/4 | 5.88 | 13 |
| mm. | 190.5 | 28.4 | 104.6 | 100.1 | 41.1 | 31.8 | 76.2 | 22.4 | 19.1 | 149.4 | 6 | ||
| yn. | 3" | 8.25 | 1.25 | 5 | 4.62 | 1.81 | 1.38 | 3.63 | 8 | 0.88 | 3/4 | 6.62 | 16 |
| mm. | 209.6 | 31.8 | 127 | 117.3 | 46 | 35.1 | 92.2 | 22.4 | 19.1 | 168.1 | 7 | ||
| yn. | 3 1/2 " | 9 | 1.38 | 5.5 | 5.25 | 1.94 | 1.56 | 4.13 | 8 | 1 | 7/8 | 7.25 | 21 |
| mm. | 228.6 | 35.1 | 139.7 | 133.4 | 49.3 | 39.6 | 104.9 | 25.4 | 22.2 | 184.2 | 10 | ||
| yn. | 4" | 10.75 | 1.5 | 6.19 | 6 | 2.12 | 1.62 | 4.63 | 8 | 1 | 7/8 | 8.5 | 37 |
| mm. | 273.1 | 38.1 | 157.2 | 152.4 | 53.8 | 41.1 | 117.6 | 25.4 | 22.2 | 215.9 | 17 | ||
| yn. | 5" | 13 | 1.75 | 7.31 | 7.44 | 2.38 | 1.88 | 5.69 | 8 | 1.12 | 1 | 10.5 | 63 |
| mm. | 330.2 | 44.5 | 185.7 | 189 | 60.5 | 47.8 | 144.5 | 28.4 | 25.4 | 266.7 | 29 | ||
| yn. | 6" | 14 | 1.88 | 8.5 | 8.75 | 2.62 | 2 | 6.75 | 12 | 1.12 | 1 | 11.5 | 80 |
| mm. | 355.6 | 47.8 | 215.9 | 222.3 | 66.5 | 50.8 | 171.5 | 28.4 | 25.4 | 292.1 | 36 | ||
| yn. | 8" | 16.5 | 2.19 | 10.62 | 10.75 | 3 | 2.25 | 8.75 | 12 | 1.25 | 11/8 | 13.75 | 115 |
| mm. | 419.1 | 55.6 | 269.7 | 273.1 | 76.2 | 57.2 | 222.3 | 31.8 | 28.6 | 349.3 | 52 | ||
| yn. | 10 " | 20 | 2.5 | 12.75 | 13.5 | 3.38 | 2.56 | 10.88 | 16 | 1.38 | 1 1/4 | 17 | 170 |
| mm. | 508 | 63.5 | 323.9 | 342.9 | 85.9 | 65 | 276.4 | 35.1 | 31.8 | 431.8 | 77 | ||
| yn. | 12 " | 22 | 2.62 | 15 | 15.75 | 3.62 | 2.75 | 12.94 | 20 | 1.38 | 1 1/4 | 19.25 | 200 |
| mm. | 558.8 | 66.5 | 381 | 400.1 | 91.9 | 69.9 | 328.7 | 35.1 | 31.8 | 489 | 91 | ||
| yn. | 14 " | 23.75 | 2.75 | 16.25 | 17 | 3.69 | 2.88 | 14.19 | 20 | 1.5 | 1 3/8 | 20.75 | 230 |
| mm. | 603.3 | 69.9 | 412.8 | 431.8 | 93.7 | 2.9 | 360.4 | 38.1 | 34.9 | 527.1 | 104 | ||
| yn. | 16 " | 27 | 3 | 18.5 | 19.5 | 4.19 | 3.06 | 16.19 | 20 | 1.62 | 1 1/2 | 23.75 | 330 |
| mm. | 685.8 | 76.2 | 469.9 | 495.3 | 106.4 | 77.7 | 411.2 | 41.1 | 38.1 | 603.3 | 150 | ||
| yn. | 18 " | 29.25 | 3.25 | 21 | 21.5 | 4.62 | 3.12 | 18.19 | 20 | 1.75 | 1.63 | 25.75 | 400 |
| mm. | 743 | 82.6 | 533.4 | 546.1 | 117.3 | 79.2 | 462 | 44.5 | 41.3 | 654.1 | 181 | ||
| yn. | 20 " | 32 | 3.5 | 23 | 24 | 5 | 3.25 | 20.19 | 24 | 1.75 | 1 5/8 | 28.5 | 510 |
| mm. | 812.8 | 88.9 | 584.2 | 609.6 | 127 | 82.6 | 512.8 | 44.5 | 41.3 | 723.9 | 231 | ||
| yn. | dau ddeg pedwar" | 37 | 4 | 27.25 | 28.25 | 5.5 | 3.62 | 24.19 | 24 | 2 | 1 7/8 | 33 | 730 |
| mm. | 939.8 | 101.6 | 692.2 | 717.6 | 139.7 | 91.9 | 614.4 | 50.8 | 47.6 | 838.2 | 331 |
